Siruba+l818fm1+error+list+2021

The L818FM1 runs at 7,000 stitches per minute. The encoder cable (part # CAB-ENC-01) rubs against the machine frame. By 2021, Siruba changed the cable routing, but older 2021 batches still had chafing issues. Inspect the cable near the motor mounting bracket. Use a nylon cable tie to lift it away from moving parts.

While I couldn't find an exhaustive error list for the Siruba L818FM1 specifically, I can provide some general information on common errors that may occur in industrial sewing machines like the L818FM1. siruba+l818fm1+error+list+2021

Ensure the needle is not stuck in the fabric. Use the handwheel to position the needle at the highest point and turn the machine off and on. 3. Safety Switch / Emergency Stop (ERR17) The L818FM1 runs at 7,000 stitches per minute

Wiring for the thread trimmer or foot lifter solenoid is damaged. Check for short circuits. 12V Power Failure Inspect the cable near the motor mounting bracket

Siruba does not publish yearly error lists publicly. To get the official (which includes full error code tables for that firmware version):