Wittmann Tempro Plus - D 360 Manual

If you have lost your physical manual, the digital version describes a user-friendly but nuanced interface. The Tempro Plus D 360 features a backlit LCD screen and a membrane keyboard. Here is the manual’s breakdown of the key commands:

| Parameter | Value | |-----------|-------| | Temperature range | +20°C … +140°C (standard) / +160°C (optional) | | Heating capacity | 9 kW (3 x 3 kW stainless steel immersion heaters) | | Cooling type | Direct injection (water-to-water) | | Cooling water requirement | 10–40°C, 2–6 bar, flow rate ≥ 40 L/min | | Pump type | Centrifugal, stainless steel impeller | | Max. pump pressure | 4.8 bar at 0 L/min; 2.5 bar at 60 L/min | | Flow measurement | Turbine wheel sensor (4–20 mA output) | | Tank volume | 3.6 liters (stainless steel, insulated) | | Electrical supply | 400V ±10%, 3-phase, 50/60 Hz, 16 A (CEE plug) | | Control system | Wittmann R8.2 controller with 5.7” color touchscreen | Wittmann Tempro Plus D 360 Manual

Do not use standard silicone sealant on the pump housing. The manual specifies Hylomar M or a PTFE-based gasket maker to prevent rubber swelling. If you have lost your physical manual, the

Before removing a mold, use the "Mold Purge" (if equipped) to blow water out of the tool back into the unit or a drain. 3. Setup and Installation Connections: pump pressure | 4

The Wittmann Tempro Plus D 360 is a temperature control device used for heating and cooling applications. It is designed to provide precise temperature control for medical and laboratory use.

Maintenance-free magnetically coupled pumps are standard for pressurized units, preventing leaks and ensuring long-term reliability. 2. Operation and Control Interface